Extremely thin wire stranding machine, is one kind of high speed stranding machine. Both of them are applied to a wire-cable multi-conductor twisted wire device.

So what is the difference between the extremely thin wire stranding machine and the high-speed stranding machine? First of all, the current very thin wire stranding machine and high-speed stranding machine category. Very thin wire stranding machine, at present, the very thin wire stranding machine is produced by Dongguan Dong Yang 130 type of very thin wire stranding machine. This type of machine is the smallest wire harness wire equipment in China at present. The common high-speed stranding machine is 200 type, 300 type, 500 type and other conventional high-speed stranding machine.

Below is a 130-wire stranded machine and 500-type stranding machine to do a comparison:

1. Different Wire diameter specifications 130 type Polar wire stranding machine is suitable for 0.0164-0.03mm conductor bundle wire. The 500-type conventional twisted-wire machine is suitable for 0.08-0.45mm. On-line diameter specifications, the obvious difference can already be seen.

Shan specification is not a heavyweight.

2. Different application situations 130 type of very thin wire stranding machine is mainly used in medical, aviation and other industries, the required cable conductor itself precision requirements are very high, the same, the requirements of the Shing is higher one level.

And the 500-type conventional stranding machine is widely used in conventional wire and cable conductor wire, low demand and wide range.

3, the price is different According to the relevant understanding, 130 type of very thin wire stranding machine, Japan similar micro-thin wire stranded machine quotes at least 600,000, while the domestic very thin wire stranding machine is at least a hundred thousand of. In the Shank requirements, the cost of the equipment itself has been improved a lot. The 500-type conventional stranding machine has a price of 570,000.

Both in terms of price, do not belong to an order of magnitude.

4. Different Equipment configuration 130-type Polar wire stranded machine in the equipment configuration are the best choice of the most equipment configuration, and with a self-torsion device, in the technical performance to achieve a good Shan requirements. But the ordinary high speed stranding machine has no back twisting device, also is not necessary.

Therefore, the equipment configuration is also much lower. Overall, the 130-type Polar wire stranding machine is a high-speed stranding machine. But there is a difference. It's not on the same level as the ordinary stranding machine. It is mainly used in the medical and aerospace areas with higher requirements.

The ordinary high-speed stranding machine, the manufacture is simple, low cost, low technology threshold, it is difficult to support a company's profits and long-term development.